Skip to content

EISCAT

Sections
Personal tools
Log in


Forgot your password?
 

EISCAT 3D design study

Up one level
Deliverables and other public documents (newest at the end)
EISCAT 3D design study Introduction and background
Evolving general intoduction including some points from the developing study.
EISCAT 3D design study SAC Report October 2003
The following report, summarising the science drivers for a new phased array radar, was written by the SAC in October 2003 and presented to the November 2003 meeting of EISCAT Council.
EISCAT 3D design study National Inputs
Several EISCAT countries submitted co-ordinated inputs summarising their science priorities and how these affected the proposed options for system development. These inputs can be found in this folder. (Note that the UK input was incorporated directly into the document).
EISCAT 3D design study The next generation ISR system.
"EISCAT_3D" - the next generation European Incoherent SCATter radar system
EISCAT 3D design study Deliverable D2.1 (WP2)
EISCAT_3D Radar Performance Specification Document. Ver 1.1 November 7, 2005
EISCAT 3D design study WP5 Report
Considerations and requirements regarding WP5:Interferometry, September 10, 2005
EISCAT 3D design study Deliverable D8.1 (WP8)
Interim report on progress in Design Study Work Package 8 (EISCAT 3-D Data System) submitted February 3rd 2006.
EISCAT 3D design study WP8 Report - February 3 2006
Progress report on Work Package 8 of the EISCAT-3D Design Study, submitted February 3rd 2006.
EISCAT 3D design study Deliverable D10.1 (WP10)
WP10: New techniques, D10.1 Progress Report, 19 March 2006
EISCAT 3D design study WP5 Report
Fundamentals of radar interferometry I:One baseline Stage 2 report, April 2006
EISCAT 3D design study Deliverable D1.1 (WP1)
1st Annual Report of the EISCAT_3D Design Study. Period: 2005-05-01 - 2006-04-30
EISCAT 3D design study 1st Activity Report
1st Activity Report of the EISCAT_3D Design Study. Period: 2005-05-01 - 2006-04-30
EISCAT 3D design study WP5 Report
Report on Synchronisation for interferometry, September 2006
EISCAT 3D design study Deliverable D5.1 (WP5)
EISCAT_3D Radar Imaging Arrays Configurations Report, submitted September 27, 2006
EISCAT 3D design study Documents from SAC71
The enclosed documents contain a number of questions submitted to the 71st SAC meeting in Uppsala, mostly relating to WP8. Since SAC did not really have time to discuss these documents, they are being made avaialble through the public part of the website to allow all of the user community to comment on them.
EISCAT 3D design study Deliverable 8.2 (WP8)
Second deliverable from Work Package 8, relating to the design of the data archiving and distribution system.
EISCAT 3D design study WP5 Report
Radar Interferometer Phase Calibration using the Visibility function of Incoherent Scattering Report, May 2, 2007
EISCAT 3D design study Deliverable D10.2 (WP10) 1:2
WP10: New techniques, D10.2 Second Progress Report (Part1): Feasibility Study Report: Use of Long Time Series ISR Data for Improving Ionospheric Correction Models at High-Latitudes, submitted 2007-04-27
EISCAT 3D design study Deliverable D10.2 (WP10) 2:2
WP10: New techniques, D10.2 Second Progress Report (Part2): First results of an open-source based program for acquiring long time series of ionospheric parameters from the EISCAT Madrigal database, submitted 2007-04-27
EISCAT 3D design study Deliverable D3.1 DRAFT (WP3)
Draft of WP3's D3.2: EISCAT_3D Radar Active Element Subsystem Report - Options for the Active Element, 2007-05-25
EISCAT 3D design study Deliverable D1:2 (WP1)
2nd Annual Report of the EISCAT_3D Design Study. Period: 2006-05-01 - 2007-04-30, published 2007-06-12
EISCAT 3D design study 2nd Activity Report
2nd Activity Report of the EISCAT_3D Design Study. Period: 2006-05-01 - 2007-04-30, published 2007-06-12
EISCAT 3D design study EISCAT_3D Mid-term Review Presentations
The EISCAT_3D Mid-term Review was held August 28, 2007 at the Swedish Institute of Space Physics (IRF), Kiruna. The Presentations have now been compiled into one pdf. Published 2007-10-23
EISCAT 3D design study Deliverable D5:2 (WP5)
Radar Imaging Algorithms Report, submitted January 30, 2008
EISCAT 3D design study Deliverable D1:3 (WP1)
3rd Annual Report of the EISCAT_3D Design Study. Period: 2007-05-01 - 2008-04-30, published 2008-06-10
EISCAT 3D design study 3rd Activity Report
3rd Activity Report of the EISCAT_3D Design Study. Period: 2007-05-01 - 2008-04-30, published 2008-06-10
EISCAT 3D design study Deliverable 8.3 (WP8)
Third deliverable from WP8, 10th September 2008.
EISCAT 3D design study WP5 Report
Final Radar Imaging Algorithms Report, submitted August, 2008
EISCAT 3D design study Deliverable D12.1 (WP12) (18-Dec-2008)
Time, Frequency and Synchronisation Subsystem Report
EISCAT 3D design study Notes from the 2nd EISCAT_3D All-Hands Meeting
Notes from the second All-Hands Meeting held at IRF-Kiruna, Sept. 16-17, 2008
EISCAT 3D design study EISCAT_3D Antenna and Array - M.Sc. work
M.Sc. work - Toralf Renkwitz Analysis and Optimisation of Medium Gain X-Yagi Antennas for the EISCAT 3D 237.5MHz Incoherent Scatter Radar Active Array
EISCAT 3D design study A Matlab Package for Phased Array Beam Shape Inspection
 
EISCAT 3D design study EISCAT_3D Annex I
Annex I, Description Of Work, 1 May 2008 revision
EISCAT 3D design study Deliverable 8.5
The fifth deliverable from WP8, describing the required interfaces to the data and archive system.
EISCAT 3D design study D6.1 Interim Report
A report on WP6 progress as of Feb. 1, 2009
EISCAT 3D design study D3.2 Options for the Active Element
 
EISCAT 3D design study D8.4: EISCAT-3D as a geophysical observatory
The fourth deliverable from WP8, looking at supporting instruments for EISCAT-3D and the effect of their data on the design of the archive systems.
EISCAT 3D design study D5.3: WP5 Data Visualisation
Deliverable D5.3: EISCAT_3D Radar Multidimensional Imaging Radar Data Visualisation Report, Published 2009-03-12
EISCAT 3D design study D7.1: WP7 Basic set of software primitives for Demonstrator
Deliverable D7.1: Basic set of control and monitoring software primitives for the WP4 demonstrator, published 2009-03-12
EISCAT 3D design study D7.2: WP7 Control and Monitoring Subsystem Report
Deliverable D7.1: EISCAT_3D Radar Control and Monitoring Subsystem Report, published 2009-03-15
EISCAT 3D design study Deliverable 12.2
Final report of D12.2
EISCAT 3D design study Deliverable 13.4
Final deliverable 13.4
EISCAT 3D design study Deliverable 13.1: WP13 Additional input material related to the preparation of D1.5/D11.1
Deliverable 13.1, published 2009-4-16
EISCAT 3D design study Deliverable 13.3: WP13 Review of steps to procure use of potential sites
Deliverable 13.3, published 2009-4-16
EISCAT 3D design study Deliverable 9.1: WP9 Basic set of processing primitives for operation of Demonstrator
Deliverable 9.1, published 2009-04-17, revised 2009-05-29
EISCAT 3D design study Deliverable D10.6: How EISCAT_3D can contribute to studies on Global Change
WP10 Report published 2009-05-02
EISCAT 3D design study D 9.3 Polarisation Estimation using Eigenspace Analysis
 
EISCAT 3D design study D 9.5 Polarisation Estimation using Subspace Tracking
 
EISCAT 3D design study D 9.4 The Reference Prior for Complex Covariance Matrices with Efficient Implementation Strategies
 
EISCAT 3D design study WP5 Final Report
Final report on WP5 by Cesar La Hoz, May 8 2009.
EISCAT 3D design study WP10 Final Report
Final report on WP10 by Cesar La Hoz, May 1 2009.
EISCAT 3D design study D6.2 ACTIVE ELEMENT SUBSYSTEM DESIGN
EISCAT_3D DELIVERABLE 6.2: ACTIVE ELEMENT SUBSYSTEM DESIGN
EISCAT 3D design study Deliverable 13.5
Frequency allocations - status report
EISCAT 3D design study Deliverable 8.6: Visualisation for EISCAT_3D
Report on visualisation techniques for EISCAT_3D, prepared by Bjorn Gustavsson, UiT.
EISCAT 3D design study Deliverable D4.2: EISCAT_3D receiver/antenna subsystem report
EISCAT_3D receiver/antenna subsystem report (Lulea Technical University).
EISCAT 3D design study Uppsala User Meeting: May 28-29 2009
Summary and presentations from the Uppsala users meeting in May 2009.
EISCAT 3D design study D9.2 Signal Processing Subsystem Report
Final deliverable from WP9, Signal Processing Subsystem Report. Published 2009-06-05
EISCAT 3D design study Deliverable D11.1 Final Design Study Report
This report summarises the results from the four-year “EISCAT_3D Design Study”, a project supported by the Sixth Framework Programme of the European Union and running from May 1, 2005 to April 30, 2009.
EISCAT 3D design study Deliverable D1.4 (WP1)
4th Annual Report of the EISCAT_3D Design Study. Period: 2008-05-01 - 2009-04-30, published 2009-06-16
EISCAT 3D design study 4th Activity Report
4th Activity Report of the EISCAT_3D Design Study. Period: 2008-05-01 - 2009-04-30, published 2009-06-16
EISCAT 3D design study Deliverable D1.5 (WP1)
The final management report of the project. Published 2009-06-16
EISCAT 3D design study Final Report - Activity Report EU-style
A publishable final activity report, cumulating and summarising the project activities and results over the full duration. Published 2009-07-20
EISCAT 3D design study Final Report - Financial Information - Appendix 4 Summary Financial Report
A Final summary financial report consolidating the costs of all the contractors taking into account any adjustments made by the Commission, in an aggregate form covering the entire duration of the project. Published 2009-07-20
EISCAT 3D design study Final Report - Financial Information - Appendix 5 Human Effort
A table of the human effort per partner and task along the entire duration of the project provided as a separate document. Published 2009-07-20